Glue and hardener are mixed in a static mixer. Accuracy of dosage is maintained within the limits set by the control authority, and manual dosage control can be carried out by test weighting the glue and hardener.

Hydraulic pump unit enable to feed high viscosity glue and hardener stably with controlled high pressure.

Matrix application is a method where the tool applying glue has been formed in the same way as the surface to be coated with glue.

The Mixon matrix applicator is a complete device which transfers the glue to the cut-off surface of the wood under pressure and with controlled dosage and amount of glue, thus saving glue and providing good conditions for strong bonding.

The glue application opening time is controlled by an automatic valve fitted to the glue matrix. In this way reaction is optimized at the same time as any excess glue can be minimized at the start and end of the gluing sequence.

The equipment can be flushed normally without disassembly during daily cleaning maintenance.

Water consumption on flushing may vary with different types of glue, but is always extremely low in comparison with conventional methods.

The application matrix can be dismantled with simple movements for more comprehensive cleaning. Where detergents are used the equipment is fitted with a detergent pump.

When producing goods with glue where a high temperature has a deleterious effect on the working life of the glue and complicates production, additional equipment is available to cool the glue with a simpler and more comprehensive procedure.

Offering optimum glue solution considering with not only the machine, but also the type of glue, environment, and all other situation for each single customer.

The profiling technology is the most efficient process for producing lumber. Profiling lines produce center products and sideboards in one single pass: fully automatic and monitored by one operator only from its ergonomic central control panel. High precision saw lines produce high-quality lumber with narrow dimension tolerances being sought after on the market.

The optimizing program uses the 3D-data from the entrance scanner for determining the optimum sideboard thickness, width and position. The permitted dimensions are taken from a table edited by the operator which also includes values. Additional data such as permitted percentage of wane and cutting lengths are also used for determining dimensions. Value optimized sideboards are the result.

Log feed speed up to 200 m /min, and the capacity of input log over 10 pcs /min and max over 20 pcs /min. Suggestion of plant for Japanese market is from 50,000 m3 to over 300,000 m3 of the amount of log input per year. LINCK enable to propose suitable line constitute for each single customer.

First installation of LINCK and EWD plant in Japan is in 2017, and it makes big influence to Japan sawmill.

URL：https://www.linck.com/en/content/home.html

A full range of industrial moulders and planers.
Enhanced with innovative ideas; powerful not only in terms of immense motor power but also sophisticated software and clever setup; robust in design and of the highest quality components; topped off with years of experience. Feed speed of moulder enable to max 1,200 m /min by StratoPlan, and specification of planer enable to process over 1,000 mm wide beam by Superles.

High speed continuous finger jointing system KONTIZINK is for production of boards with single piece milling system that produces vertical finger joints at astonishing feeding rates. Enable to feed and shape random length lamella up to 120 pcs /min without stop according to continuous cycle. And original chain press with the patented KONTIZINK pressure buildup system enable to joint up to 120 m /min. Installation of Kontizink in Japan have already three plant, and it is assessed as an innovative machine of finger jointing system to solve the weakness of glulam plant.

Offer complete CLT production lines for cross laminated timber panels. CLT production capacity from 5,000 m3 per shift per year up to over 150,000 m3 by X-PRESS with all other auxiliary equipment. X-PRESS enable to produce 3m x 12m size of panel, and LEDINEK produce complete CLT production line with planer, finger jointing and press.

URL：http://www.ledinek.com/en/index.html

TECHNO WALL is a CNC controlled, patented woodworking center for panel processing. It can process wall panels in widths of 3000 to 8000 mm wide, thickness up to 400 mm and, because of its modular structure, unlimited length. What makes this machine unique is a patented tool holder of exchangeable tools with a permanent saw blade of diameter up to 1000 mm and a 5-axis tool changer that can host large-dimension tools for processing just about any material.

TECHNO PF is a CNC controlled for beam processing.
It enable to work on 5 sides of the timber, without turning, or automatically turn timber to work on the opposite side. Choose a single or double tool head, each with independent axis to a total of 20 different tools. The in- and out-feed sections can be extended by a slide-out section to fit virtually any length of timber.

Software correspond with BTL format according to ISO standard.
This is why machine compatible with various software because of this common interface. Original CAM software TECHNO ESSETRE enable to use a lot of function, nesting, automatic tool select, graphic simulation…and so on.

URL：https://www.essetre.com/en/

Website：https://smartiwoodscanning.com/